Why IronCAD?

Powered by the unique TriBall, IronCAD is the most innovative and intuitive 3D CAD software on the market!

Comparison

Traditional CAD vs 3D CAD

  Comparison

  IronCAD

Traditional 3D Systems

Ease Of Use

Takes days to learn.

Click To Expand & Read More

You can get confident using IronCAD in just days, sometimes even in hours. This is due to IronCAD’s intuitive tools that approach design in a more natural way and state of the art online training.

Takes weeks to months to learn.

Click To Expand & Read More

People often do lengthy training courses just to get confident using traditional 3D CAD systems, and still it often takes months before they are productive

Overall Methodology

Fundamentally more innovative approach.

Click To Expand & Read More

In IronCAD, you start with a catalog of 3D shapes that you can drag and drop into your model. You can then simply push and pull to make precise changes in seconds. When (and if) needed, you can also go into a 2D sketch that drives the shape, all without ever creating a plane or doing an extrude command. You can then use IronCAD’s patented TriBall to position and pattern anything in 3D, all without needing to create or use reference planes like traditional systems. IronCAD is built to let you design the way you think, with easy to understand tools and features to provide a natural extension of your imagination.

Slow approach to 3D design.

Click To Expand & Read More

Traditional CAD systems model the “traditional” 3D CAD way, which once seemed quite fast, however, is now a much slower approach. This involves creating planes, starting with 2D sketches, unnecessarily constraining many sketch lines, designing parts multiple individual files, history-dependent design rules and more. This traditional methodology slows down the design process and gives you far less control. Learning this method can also take a significant amount of your time, and once learned you still don’t get the speed or flexibility that IronCAD’s tools provide.

Feature History

History-independent, easy to make changes.

Click To Expand & Read More

In IronCAD, you model with a feature based history tree, but features are independent. This means you can choose when and where to apply constraints, giving you the control to make changes when and where needed without the problems common in traditional CAD systems. This gives you a much more versatile modeling environment and lets you make design changes without worrying about the effect of earlier modeling choices. IronCAD even allows you to switch on and off the same type of history-dependency as traditional CAD systems. However, in almost every case, the IronCAD way will be much faster, give you more control, and ultimately be more productive.

History-dependent, difficult to make changes.

Click To Expand & Read More

In traditional software, you model with history-dependency. This means everything you do is automatically constrained by whatever you did before it. This may not be a problem if you know exactly what your design will look like before you start (and all the steps to make it), but in almost every case you’ll want to make changes along the way. Because of these constraints being applied without choice, making design changes later can be extremely difficult and often leads to model crashes which can take can take hours to fix. All in all, this approach will usually slow you down and decrease your productivity, especially when editing previously made models.

Assemblies

Unified design environment. One file.

Click To Expand & Read More

In IronCAD, part and assembly files are the same. You can build 1 part or 1 million parts in the same file. So you can design in the context of your overall assembly and design. Sizing parts to fit to other components in your design, and making them fit perfectly first time. This is also a much more natural way of thinking about your design, you can think if the design as a whole working system. You can also still isolate individual parts to work on them, all whilst in the same file. This also means you don’t have to go through the tedious process of mating all your parts together to make the assembly, everything is already in the right place and fits perfectly first time. The only potential positive of the traditional way is that when you have one part in multiple assemblies, you can link it to update in every assembly when a change is made. IronCAD allows you to do this external linking without having to do it for every single part, simply choose the ones you want to save externally and you’re done. So you get the good without the bad. IronCAD provides a far better system from the ground up and still gives you the option to use the only beneficial feature of the traditional part system. Furthermore, you can create separate or combined technical drawings for every individual part and assembly, all from the one 3D file. IronCAD also has a bulk drawing tool, so you can very quickly generate drawing sheets with predefined views for every part in your model, drmatically speeding up drawing time.

Separate part and assembly files.

Click To Expand & Read More

In traditional systems, part and assembly files are different. You model all your parts in separate files, then combine them in an assembly at the end. This means you have to deal with many separate files that can easily be lost or misplaced on a computer and are hard to share. You also have to go through the tedious process of mating and aligning all these parts to assemble your assembly, fitting them into their correct positions after in a completely separate process to when you made them. Even if these parts aren’t moving parts, you’ll likely still need to mate them to lock them down. Designing this way also means in most cases you’re not designing within the context of the assembly, so it’s harder to see how your changes affect the entire model, which creates an overall worse design experience. Parts made in a separate file can often not fit correctly the first time, so you have to spend unnecessary time going back and forth changing these parts.

Catalogs

Customizable catalog system.

Click To Expand & Read More

In IronCAD, you have IronCAD’s industry famous catalog system. Any part, any shape, or any assembly you create can be drag and dropped into a custom catalog in seconds. It’s like a painter’s palette for CAD data, just drag on and off what you need. You can even use IronCAD’s SmartAssembly technology to create intelligent auto-positioning parts and assemblies. So when you drop a part out, it automatically positions itself and resizes if needed. SmartAssembly can even be used on an iPad in the field to create customized modular assemblies in seconds, you can even add prices to components and get a complete summary of the project in seconds. This system makes IronCAD absolutely excel at modular based design, with almost limitless capabilities for what can be built into an IronCAD catalog.

Basic catalogs, minimal features.

Click To Expand & Read More

In traditional systems, only some parts are available in catalogs and these are often ‘standard’ parts and not your own custom parts. All parts you create are opened individually to edit, or brought into an assembly as they are. This is an unnecessarily slow and tedious approach to work with multiple parts and assemblies.

Moving / Copying

IronCAD's independent (and award-winning) TriBall.

Click To Expand & Read More

In IronCAD, you can use the patented TriBall productivity tool. The TriBall allows you to parametrically position, move, and pattern anything from sketches to shapes to parts and assemblies. The TriBall has become famous for its huge benefit to CAD productivity over the years and continues to be one of the most productive and useful single tools in any 3D CAD system. The difference the TriBall makes to CAD design processes around the world is simply amazing.

Slow constraints and patterning tools.

Click To Expand & Read More

In traditional systems, to move, position and pattern things you will often have to go into a 2D environment and define the pattern or go through multiple dialogue boxes and features. This is time-consuming and unintuitive. Additionally, when positioning parts in an assembly, you will have to mate parts or use other slow methods to get the parts into their correct locations, unnecessary time that could be spent designing the product.

About IronCAD

Winner of numerous industry awards, the IronCAD Design Collaboration Suite is an intuitive 3D design productivity solution that empowers users, increases efficiency, and extends 3D collaboration throughout the enterprise. IronCAD engineering design software products are designed to be used standalone, to complement an existing design environment, and with one another to facilitate cross-department collaboration.

 

For Everyone

Built For Freelancers, Agencies, & Personal Use

IronCAD is tailor made to be the best software on the market, no matter what you need it for. Try it out today and see what all the hype is about.

Don’t Miss A Thing!

Subscribe to our social media pages.